Air flow 30,000-60,000 m3h direct expansion Air Handling Units with condenser unit

Features of EK clean-room air handling unit EK clean-room air handling unit is specifically designed for clean rooms. It provides a built-in cooling and heating source, integrates air handling and automatic control functions, and has the following features: low investment, simple system, efficient running, and easy installation and maintenance.

The unit has a simple design and easy control, and is suitable for independent use.

The indoor unit can be directly mounted to the ceiling or in an attached room, not requiring a special air-conditioner room.

No chilled or cooling water system is required. The control is simple. The project can be completed phase by phase at a low construction cost.

The maintenance is simple. Maintenance of a single unit requires only the space of the clean room.

The unit can run at temperature ranging from -10°C to 48°C.

Applicable to scenarios with constant-temperature constant-humidity control requirements

This unit is equipped with high-quality DDC controllers, basic direct-expansion coils, a primary-efficient filter (G4) and a medium-efficient filter (F8), pressure difference display control, non-step electric heating, a high-quality proportional electrode humidifier, and smart EK air-conditioner control solution, meeting requirements of a constant-temperature project for different granularity temperature and humidity control.

Specifications

Note:
The nominal cooling capacity (1) is measured under the following conditions: The indoor dry/wet bulb reads 27/19 °C and the outdoor dry/ wet bulb reads 35/24 °C. The nominal heating capacity (1) is measured under the following conditions: The indoor dry bulb reads 20 °C and the outdoor dry/wet bulb reads 7/6 °C.