R410A Heat Recovery Unit Modular Water Source Heat Pump 74 KW 110KW 150KW EKWD manufacturer from China EuroKlimat Air Conditioning Refrigeration Company

R410A Heat Recovery Unit Modular Water Source Heat Pump 74 KW 110KW 150KW

Place of Origin:

Zhejiang, China (Mainland)


	Add to My Favorites
HiSupplier Escrow	Share \|

Product Detail

Model No.: EKWD

R410A Heat recovery unit modular water source heat pump 74 KW 110KW 150KW

<span st

R410A Heat recovery unit modular water source heat pump 74 KW 110KW 150KW

Specifications

Basic modules				EKWD021CRQR/QV	EKWD032CRQR/QV	EKWD043CRQR/QV
Water Circulation Mode	Nominal Cooling Capacity		kW	74	110	150
	Nominal Heating Capacity		kW	89	148	200
	Total Power of Nominal Cooling Capacity		kW	14.0	22.3	30.0
	Total Power of Nominal Heating Capacity		kW	17.2	28.5	37.4
	Water flow	Application side	m³/h	12.7	18.9	25.8
		Heat source side	m³/h	15.1	22.8	30.9
Heat Recovery Mode	Nominal Cooling Capacity		kW	66	100	135.5
	Nominal Heat Recovery Capacity		kW	83	126	170
	Total Nominal Power		kW	17	26	34.5
	Nominal water flow at the heat recovery side		m³/h	14.3	21.7	29.2
	Nominal water flow at the evaporation side		m³/h	12.7	18.9	25.8
Water heater mode	Nominal Heating Capacity		kW	81	135	184
	Total Nominal Power		kW	19.1	32.1	43.5
	Nominal water flow at the hot water side		m³/h	14.3	21.7	29.2
	Water flow at the heat source side (evaporation side)		m³/h	15.1	22.8	30.9
Water pressure drop	Application side (air conditioner side)		kPa	21	30	30
	Heat source side		kPa	17	19	19
Heat exchanger type	Application side (evaporator)			Plate	Shell-and-tube
	Heat source side (condenser)			Shell-and-tube
Recommended total pipe diameter	Evaporator		mm	DN65	DN65	DN80
	Condenser		mm	DN65	DN65	DN80
Volume Adjustment	Steps			2	3	4
	Regulation mode			Fuzzy control
Compressor	Model			Fully hermetic volute
	Lubricant			Mineral oil (SUNISO 3GS)
Refrigerant	Flow control method			Electronic expansion valve
	Category			R22
Dimensions	L x H x W		mm	1647x1202x632	2247x1488x710
Unit weight	Net weight		kg	452(517)	703(818)	887(1040)
	Transportation weight		kg	478(543)	738(853)	922(1075)

Notes: Test conditions for the unit are as follows:
Test conditions for nominal cooling capacity: inlet chilled water temperature at the application side 12°C; outlet chilled water temperature at
the application side 7°C; inlet cooling water temperature at the heat source side 30°C; outlet chilled water temperature at the heat source
side 35°C.
Test conditions for nominal heating capacity: inlet/outlet water temperature at the application side 40/-°C, and rated water flow at the
application side for nominal cooling; inlet/outlet water temperature at the heat source side 20/-°C, and rated water flow at the heat source
side for nominal cooling.
Test conditions for the heat recovery mode: inlet/outlet water temperature at the heat recovery side 40/45°C; inlet/outlet chilled water
temperature at the application side 12/-°C, and rated water flow at the application side for nominal cooling.
Test conditions for the water heater mode: inlet/outlet water temperature at the hot water side (application side) 50/-°C, and rated water
flow at the heat recovery side for heat recovery conditions; inlet/outlet water temperature at the heat source side (evaporation side) 20/-°C;
rated water flow at the heat source side for nominal cooling.
Switching between the cooling, heating, water heater, and heat recovery modes is implemented through an external valve connected to
the water system. The unit provides a interface for controlling the electric val